+91 0771-2533510 +91 82245-19999 support@zarpaints.com

It can be used enhance and impart gloss on exterior wood.

  • Easy Application
  • Durable Finish,
  • Self Sealing

Air Spray or Brush

  • 20 Ltrs.
  • 4 Ltrs.
  • 1 Ltr.
  • 500 ML.
  • 200 ML.

lean the surface thoroughly using sand paper, the surface should be free from dust and debris. After surface preparation apply Magic sanding sealer using paint brush or spray. Let the coat dry for atleast 4-6 hours and then the surface is ready to be applied with Magic wood gloss. Let the coat dry for atleast 4-6 hours, due care should be taken that when the coat is wet, dust should not stick to the surface so that a clean and uniform finish is obtained.

As a general rule, avoid inhalation of solvent vapours or paint mist and contact of paint with skin and eyes. Provide forced ventilation when working with solvent borne coating in confined spaces or stagnant air. Also provide respiratory, skin and eye protection. Also follow local and national safety regulations.

Actual covering capacity may vary depending upon the method & condition of application, surface condition, temperature, wind velocity, application skills, surface roughness, surface porosity & shade.

As long as the containers is sealed and kept at normal temperature without any direct exposure to sunlight.

  • It is used to provide high gloss appearance with antique look to wooden surfaces.
  • It can be used as Top Coat application.
  • High Gloss,
  • Fast Drying,
  • Good moisture resistance,
  • Excellent gloss retention.

By padding

Golden & Clear

  • 20 Ltrs.
  • 5 Ltrs.
  • 2.5 Ltrs.
  • 1 Ltr.
  • 500 ML.
  • 250 ML.
  • 20 ML.

lean the surface thoroughly using sand paper, the surface should be free from dust and debris. After surface preparation apply Magic sanding sealer using paint brush or spray. Let the coat dry for atleast 4-6 hours and then the surface is ready to be applied with MAGIC WOOD POLISH. Let the coat dry for atleast 4-6 hours, due care should be taken that when the coat is wet, dust should not stick to the surface so that a clean and uniform finish is obtained.

As a general rule, avoid inhalation of solvent vapours or paint mist and contact of paint with skin and eyes. Provide forced ventilation when working with solvent borne coating in confined spaces or stagnant air. Also provide respiratory, skin and eye protection. Also follow local and national safety regulations.

*Actual covering capacity may vary depending upon the method & condition of application, surface condition, temperature, wind velocity, application skills, surface roughness, surface porosity & shade.

**As long as the containers is sealed and kept at normal temperature without any direct exposure to sunlight.

  • It is used as a sealing coat.
  • It is used to improve the appearance of top coat clears.
  • Easy to apply and sand,
  • Good Adhesion,
  • Flexible Film.

Spray or Padding

  • 20 Ltrs.
  • 4 Ltrs.
  • 1 Ltr.
  • 500 ML.

Clean the surface thoroughly using sand paper, the surface should be free from dust and debris. The surface is ready for the application of magic sanding sealer. Let the coat dry for atleast 4-6 hours after which sand the surface one more time using sand paper so that it is ready for the desired top coat.

As a general rule, avoid inhalation of paint mist and contact of paint with skin and eyes. Provide forced ventilation when working in confined spaces or stagnant air. Also provide respiratory, skin and eye protection. Do not allow Kids to come near the paint. Also follow local and national safety regulations.

*Actual covering capacity may vary depending upon the method & condition of application, surface condition, temperature, wind velocity, application skills, surface roughness, surface porosity & shade.

**As long as the containers is sealed and kept at normal temperature without any direct exposure to sunlight.

It is a premium acid cured wood finish which provides excellent look to interior furniture.

  • Long Life,
  • Good Gloss Retention,
  • Stain Resistant,
  • Good hardness and
  • Scratch Resistance.

Spray or Brush

All Gloss And Matt

  • 20 ltrs.
  • 4 ltrs.
  • 1 ltrs.

Clean the surface thoroughly using sand paper, the surface should be free from dust and debris. After surface preparation apply Magic sanding sealer using paint brush or spray. Let the coat dry for atleast 4-6 hours and then the surface is ready to be applied with MAGIC MELAMINE. Let the coat dry for atleast 4-6 hours, due care should be taken that when the coat is wet, dust should not stick to the surface so that a clean and uniform finish is obtained.

As a general rule, avoid inhalation of paint mist and contact of paint with skin and eyes. Provide forced ventilation when working in confined spaces or stagnant air. Also provide respiratory, skin and eye protection. Do not allow Kids to come near the paint. Also follow local and national safety regulations.

*Actual covering capacity may vary depending upon the method & condition of application, surface condition, temperature, wind velocity, application skills, surface roughness, surface porosity & shade.**As long as the containers is sealed and kept at normal temperature without any direct exposure to sunlight.

**As long as the containers is sealed and kept at normal temperature without any direct exposure to sunlight.

It is a premium acrylic based clear tough coating which enhances the look of furniture.

  • Excellent Gloss Retention,
  • Crack Resistant,
  • Scratch Resistant and
  • Good hardness

Spray or Brush

All Gloss And Matt

  • 20 ltrs.
  • 4 ltrs.
  • 1 ltrs.
  • 500 ML.
  • 200 ML.

Clean the surface thoroughly using sand paper, the surface should be free from dust and debris. After surface preparation apply Magic sanding sealer using paint brush or spray. Let the coat dry for atleast 4-6 hours and then the surface is ready to be applied with MAGIC PU CLEAR. Let the coat dry for atleast 4-6 hours, due care should be taken that when the coat is wet, dust should not stick to the surface so that a clean and uniform finish is obtained.

As a general rule, avoid inhalation of paint mist and contact of paint with skin and eyes. Provide forced ventilation when working in confined spaces or stagnant air. Also provide respiratory, skin and eye protection. Do not allow Kids to come near the paint. Also follow local and national safety regulations.

*Actual covering capacity may vary depending upon the method & condition of application, surface condition, temperature, wind velocity, application skills, surface roughness, surface porosity & shade.**As long as the containers is sealed and kept at normal temperature without any direct exposure to sunlight.

**As long as the containers is sealed and kept at normal temperature without any direct exposure to sunlight.