+91 0771-2533510 +91 82245-19999 support@zarpaints.com

MAGIC GLOSS PREMIUM SYNTHETIC ENAMEL is an alkyd based paint with excellent gloss, weather resistance and Colour retention.

It is used as a finishing coat on exterior/interior wood or steel surfaces in mildly to moderately corrosive environment.

  • Excellent Gloss and High Coverage.
  • Fantastic Stain Resistance.
  • High Durability.
  • Water Repellent.
  • Excellent Flow Characteristics.

Air Spray, Brush

  • APPLICATION : Air Spray, Brush
  • VOLUME SOLIDS : 35%
  • RECOMMENDED DFT : 25 microns
  • CORESSPONDENT WFT : 75 microns
  • THEORETICAL SPREADING RATE AT ABOVE DFT : 20 M2/Ltr/Coat*
  • DRYING – SURFACE DRY : Within 2 hrs
  • HARD DRY : Within 4 hrs
  • COLOUR : White, Assorted
  • FINISH : High Gloss
  • OVERCOAT INTERVAL : Min 4 hrs Max None
  • FLASH POINT : Above 40°C
  • THINNER : 20% by Volume with Turpentine Oil
  • SHELF LIFE : 3-4 Years**

White & All Other Shades

  • 20 Ltrs.
  • 10 Ltrs.
  • 4 Ltrs.
  • 1 Ltrs.
  • 500 ML.
  • 100 ML.
  • 50 ML.
  • 20 ML.

Clean the surface thoroughly using wire brush and sand paper. Surface Imperfections should be dealt with by applying MAGIC Knifing Paste Filler after which a coat of MAGIC Metal Primer Red Oxide should be applied. Surface thus prepared is ready for application of MAGIC premium synthetic enamel. Stir thoroughly before application. Material is supplied ready to use but can be thinned by turpentine oil up to 10 % by volume depending upon the surface. Apply two coats at interval of 8 hours between the two coats.

As a general rule, avoid inhalation of paint mist and contact of paint with skin and eyes. Provide forced ventilation when working in confined spaces or stagnant air. Also provide respiratory, skin and eye protection. Do not allow Kids to come near the paint. Also follow local and national safety regulations.

Actual covering capacity may vary depending upon the method & condition of application, surface condition, temperature, wind velocity, application skills, surface roughness, surface porosity & shade.**As long as the containers is sealed and kept at normal temperature without any direct exposure to sunlight.

As long as the containers is sealed and kept at normal temperature without any direct exposure to sunlight.

MAGIC GLOSS PREMIUM SATIN ENAMEL is an alkyd based paint with excellent gloss, weather resistance and Colour retention.

It is used as a finishing coat on exterior/interior wood or steel surfaces in mildly to moderately corrosive environment.

  • Excellent Gloss and High Coverage
  • Fantastic Stain Resistance
  • High Durability
  • Water Repellent
  • Excellent Flow Characteristics

Spray, Brush or Roller

  • APPLICATION : Air Spray, Brush
  • VOLUME SOLIDS : 35%
  • RECOMMENDED DFT : 25 microns
  • CORRESPONDING WFT : 75 microns
  • THEORETICAL SPREADING RATE AT ABOVE DFT : 20 M2/Ltr/Coat*
  • DRYING – SURFACE DRY : Within 2 hrs
  • HARD DRY : Within 4 hrs
  • COLOUR : White , Assorted
  • FINISH : High Gloss
  • OVERCOAT INTERVAL : Min 4 hrs Max None
  • FLASH POINT : Above 40°C
  • THINNER : 20% by Volume with Turpentine Oil
  • SHELF LIFE : 3-4 years**

White & All Other Shades

  • 20 Ltrs.
  • 4 Ltrs.
  • 1 Ltr.
  • 500 ML.

Clean the surface thoroughly using wire brush and sand paper. Surface Imperfections should be dealt with by applying MAGIC Knifing Paste Filler after which a coat of MAGIC Metal Primer Red Oxide should be applied. Surface thus prepared is ready for application of MAGIC Premium Satine Enamel. Stir thoroughly before application. Material is supplied ready to use but can be thinned by turpentine oil up to 20 % by volume depending upon the surface. Apply two coats at interval of 4 to 6 hours between the two coats.

As a general rule, avoid inhalation of paint mist and contact of paint with skin and eyes. Provide forced ventilation when working in confined spaces or stagnant air. Also provide respiratory, skin and eye protection. Do not allow Kids to come near the paint. Also follow local and national safety regulations.

*Actual covering capacity may vary depending upon the method & condition of application, surface condition, temperature, wind velocity, application skills, surface roughness, surface porosity & shade.**As long as the containers is sealed and kept at normal temperature without any direct exposure to sunlight.

**As long as the containers is sealed and kept at normal temperature without any direct exposure to sunlight.

MAGIC AJOOBA SYNTHETIC ENAMEL is an alkyd based paint with decent gloss, good flow and Colour retention.

It is used as a finishing coat on exterior/interior wood or steel surfaces in mildly corrosive environment.

  • Economical and is recommended for interior purposes
  • Glossy Finish
  • Tough and Durable Film
  • Good Flow

Spray, Brush or Roller

  • APPLICATION : Air Spray, Brush
  • VOLUME SOLIDS : 30%
  • RECOMMENDED DFT : 30 microns
  • CORRESPONDING WFT : 78 microns
  • THEORETICAL SPREADING RATE AT ABOVE DFT :16 M2/Ltr/Coat*
  • DRYING – SURFACE DRY : Within 6 hrs
  • HARD DRY : Within 8 hrs
  • COLOUR : White , Assorted
  • FINISH : Gloss
  • OVERCOAT INTERVAL : Min 6 hrs Max None
  • FLASH POINT : Above 40°C
  • THINNER : 10% by Volume with Turpentine Oil
  • SHELF LIFE : 3-4 Years**

White & All Other Shades

  • 20 Ltrs.
  • 10 Ltrs.
  • 4 Ltrs.
  • 1 Ltr.
  • 500 ML.
  • 200 ML.
  • 100 ML.
  • 50 ML.

Clean the surface thoroughly using wire brush and sand paper. Surface Imperfections should be dealt with by applying MAGIC Knifing Paste Filler after which a coat of MAGIC Metal Primer Red Oxide should be applied. Surface thus prepared is ready for application of AJOOBA Synthetic Enamel. Stir thoroughly before application. Material is supplied ready to use but can be thinned by turpentine oil up to 10 % by volume depending upon the surface. Apply two coats at interval of 8 hours between the two coats.

As a general rule, avoid inhalation of paint mist and contact of paint with skin and eyes. Provide forced ventilation when working in confined spaces or stagnant air. Also provide respiratory, skin and eye protection. Do not allow Kids to come near the paint. Also follow local and national safety regulations.

*Actual covering capacity may vary depending upon the method & condition of application, surface condition, temperature, wind velocity, application skills, surface roughness, surface porosity & shade.**As long as the containers is sealed and kept at normal temperature without any direct exposure to sunlight.

**As long as the containers is sealed and kept at normal temperature without any direct exposure to sunlight.