+91 0771-2533510 +91 82245-19999 support@zarpaints.com
  • Excellent lusture
  • Good protective properties
  • Excellent heat resistance
  • Can withstand upto 250 C
  • Recommended for use in Industrial environment. Resistance to splash of mild chemicals. Fast drying.
  • Recommended for use in Industrial environment. Resistance to splash of mild chemicals. Fast drying.
  • Designed to provide good resistance to mild inorganic acid, alkalies and salt solution. Good resistance to saline and chemical atmosphere.
  • Magic Zinc Phosphate offers inhibitive or active corrosion protection.  It is a combination of superior barrier properties with excellent wetting and adhesive characteristics.
  • Better corrosion resistance than Zn Phos. Primer. Fast drying and recoat able with lacquer or enamel.
  • It is 90 % Zinc Oxide. It offers sacrificial corrosion through preferential oxidation of the zinc metal. It combines the resistance properties of epoxy and galvanic properties of Zinc. Zinc Rich Primer is self healing and prevents creep age even if the surface is penetrated or scratched.
  • Used in the presence of highly alkaline or acidic fumes or heavy dusting. Passive barrier protection mechanism of resin results in low water transmission. No primer is required and can be sued directly as top coat.
  • We manufacture Tie Coat, Base Coat and Top Coat epoxy based paints for floors. These coatings have non slip characteristics, high gloss and can withstand heavy wear and tear. They are aesthetically pleasing and also have high impact resistance.
  • It helps to maintain gas pressure in the plant. It prevents corrosion of the steel imbedded in concrete.
  • Provides maximum protection with minimum heat losses.
  • The highly protective film prevents corrosion and rusting.
  • Magic Hammer tone finish imparts hammered effect to the paint which gives a unique metallic look. The paint is designed for single coat application which dries very fast and gives good gloss. It is a very versatile paint which does not require much surface preparation.
  • Magic Stipple finish gives a unique texured effect which is uneven and glare free. The paint dries fast and achieves hardness in short time. The film formed is tough and resists normal wear and tear.
  • Magic PU enamel is a two component polyurethane based that forms a tough and flexible film, resistant to solvent and moisture. This has be formulated to provide excellent resistance abrasion and direct impact and provides good adhesion to most substrates and is recommended for heavy duty industrial applications where a tough coating is required.
  • Magic Coal-Tar Epoxy is a two component, high solid polyamide converted epoxy blended with refined coal-tar pitch.
  • Magic AC Bituminous black is an excellent high performance bitumin based coating as per IS 158 that resists acid, alkali and heat. It is lead free and protects the surface from atmospheric corrosion, chemical fumes and industrial gases. It also possesses high resistance to moisture, saline and fresh water.
  • Magic QD emanel is a fast drying equipment enamel specially formulated for protecting interior and exterior steel surfaces with exceptionally high gloss and long lasting finish.
  • Magic Stoving enamel comes in different stoving schedules. Most common stoving schedule is 120 C in 30 minutes. It is a thermosetting paint whicj requires heat to get cured. The paint inparts tough film when cured. The film is flexible with good surface adhesion and chemical resistance.