+91 0771-2533510 +91 82245-19999 support@zarpaints.com

It can be used for application on cars, trucks, buses, trollys, hyva etc.

  • Abrasion resistant
  • Low dirt pick up
  • fast drying
  • High gloss
  • Excellent pigment depth
  • Good adhesion

130 Sq. Ft. / Coat

Spray, Brush or Roller

  • APPLICATION : Spray, Brush, Roller
  • RECOMMENDED DFT : 30 microns
  • THEORETICAL SPREADING RATE AT ABOVE DFT : 28 M2/Ltr/Coat*
  • DRYING – SURFACE DRY : Within 1 hrs
  • HARD DRY : Within 4 hrs
  • COLOUR : White, Assorted
  • FINISH : High Sheen
  • OVERCOAT INTERVAL : Min 4 hrs Max None
  • FLASH POINT : Non Combustible
  • THINNER : 30 % by Volume with Water
  • SHELF LIFE : 3-4 Years**

White & All Other Shades

  • 20 Ltrs.
  • 10 Ltrs.
  • 4 Ltrs.
  • 1 Ltrs.

Clean the surface thoroughly using wire brush or sand paper, the surface should be free from dust and debris. After surface preparation apply Magic oil primer brown using paint brush or spray. Let the coat dry for atleast 4-6 hours and then the undulation of the surface is corrected with magic knifing paste filler, then the surface is ready to be applied with allied high gloss truck enamel.

As a general rule, avoid inhalation of paint mist and contact of paint with skin and eyes. Provide forced ventilation when working in confined spaces or stagnant air. Also provide respiratory, skin and eye protection. Do not allow Kids to come near the paint. Also follow local and national safety regulations.

Actual covering capacity may vary depending upon the method & condition of application, surface condition, temperature, wind velocity, application skills, surface roughness, surface porosity & shade.**As long as the containers is sealed and kept at normal temperature without any direct exposure to sunlight.

It can be used for application on cars, trucks, buses, trollys, hyva etc.

  • Very Economical,
  • Pleasant Matt Finish,
  • Decent Washablility.

130 Sq. Ft. / Coat

Spray, Brush or Roller

  • APPLICATION : Spray, Brush, Roller
  • RECOMMENDED DFT : 30 microns
  • THEORETICAL SPREADING RATE AT ABOVE DFT : 28 M2/Ltr/Coat*
  • DRYING – SURFACE DRY : Within 1 hrs
  • HARD DRY : Within 4 hrs
  • COLOUR : White, Assorted
  • FINISH : High Sheen
  • OVERCOAT INTERVAL : Min 4 hrs Max None
  • FLASH POINT : Non Combustible
  • THINNER : 30 % by Volume with Water
  • SHELF LIFE : 3-4 Years**

White & All Other Shades

  • 20 Ltrs.
  • 10 Ltrs.
  • 4 Ltrs.
  • 1 Ltr.

Clean the surface thoroughly using wire brush or sand paper, the surface should be free from dust and debris. After surface preparation apply ALLIED RED OXIDE GLOSSY using paint brush or spray. Let the coat dry for atleast 4-6 hours and then the surface is ready to be applied with the desired top coat.

As a general rule, avoid inhalation of paint mist and contact of paint with skin and eyes. Provide forced ventilation when working in confined spaces or stagnant air. Also provide respiratory, skin and eye protection. Do not allow Kids to come near the paint. Also follow local and national safety regulations.

Actual covering capacity may vary depending upon the method & condition of application, surface condition, temperature, wind velocity, application skills, surface roughness, surface porosity & shade.**As long as the containers is sealed and kept at normal temperature without any direct exposure to sunlight.

It can be used for application on cars, trucks, buses, trollys, hyva etc.

  • Very Economical,
  • Pleasant Matt Finish,
  • Decent Washablility.

130 Sq. Ft. / Coat

Spray, Brush or Roller

  • APPLICATION : Spray, Brush, Roller
  • RECOMMENDED DFT : 30 microns
  • THEORETICAL SPREADING RATE AT ABOVE DFT : 28 M2/Ltr/Coat*
  • DRYING – SURFACE DRY : Within 1 hrs
  • HARD DRY : Within 4 hrs
  • COLOUR : White, Assorted
  • FINISH : High Sheen
  • OVERCOAT INTERVAL : Min 4 hrs Max None
  • FLASH POINT : Non Combustible
  • THINNER : 30 % by Volume with Water
  • SHELF LIFE : 3-4 Years**

White & All Other Shades

  • 20 Ltrs.
  • 10 Ltrs.
  • 4 Ltrs.
  • 1 Ltr.

Clean the surface thoroughly using wire brush or sand paper, the surface should be free from dust and debris. After surface preparation apply MAGIC OIL PRIMER BROWN using paint brush or spray. Let the coat dry for atleast 4-6 hours and then the surface is ready to be applied with the desired top coat.

As a general rule, avoid inhalation of paint mist and contact of paint with skin and eyes. Provide forced ventilation when working in confined spaces or stagnant air. Also provide respiratory, skin and eye protection. Do not allow Kids to come near the paint. Also follow local and national safety regulations.

Actual covering capacity may vary depending upon the method & condition of application, surface condition, temperature, wind velocity, application skills, surface roughness, surface porosity & shade.**As long as the containers is sealed and kept at normal temperature without any direct exposure to sunlight.

It can be used for application on cars, trucks, buses, trollys, hyva etc.

  • Abrasion resistant
  • Low dirt pick up
  • Fast drying
  • High gloss
  • Excellent pigment depth
  • Good adhesion

130 Sq. Ft. / Coat

Spray, Brush or Roller

  • APPLICATION : Spray, Brush, Roller
  • RECOMMENDED DFT : 30 microns
  • THEORETICAL SPREADING RATE AT ABOVE DFT : 28 M2/Ltr/Coat*
  • DRYING – SURFACE DRY : Within 1 hrs
  • HARD DRY : Within 4 hrs
  • COLOUR : White, Assorted
  • FINISH : High Sheen
  • OVERCOAT INTERVAL : Min 4 hrs Max None
  • FLASH POINT : Non Combustible
  • THINNER : 30 % by Volume with Water
  • SHELF LIFE : 3-4 Years**

White & All Other Shades

  • 20 Ltrs.
  • 10 Ltrs.
  • 4 Ltrs.
  • 1 Ltrs.

Clean the surface thoroughly using wire brush or sand paper, the surface should be free from dust and debris. After surface preparation apply GAIN automotive enamel. using paint brush or spray. Let the coat dry for atleast 4-6 hours and then the undulation of the surface is corrected with magic knifing paste filler, then the surface is ready to be applied with allied high gloss truck enamel.

As a general rule, avoid inhalation of paint mist and contact of paint with skin and eyes. Provide forced ventilation when working in confined spaces or stagnant air. Also provide respiratory, skin and eye protection. Do not allow Kids to come near the paint. Also follow local and national safety regulations.

Actual covering capacity may vary depending upon the method & condition of application, surface condition, temperature, wind velocity, application skills, surface roughness, surface porosity & shade.**As long as the containers is sealed and kept at normal temperature without any direct exposure to sunlight.